Description
Adiseal Ultimate 10mm x 150mm Masonry & Multi-Material Drill Bit Carbide
Adiseal Ultimate 10mm masonry and multi-material drill bit is the fastest and most durable drill bit for non-hammer drilling. Engineered with a high-strength carbide tip and a 1/4 inch quick-change hex shank, this patented bit drills faster and lasts longer than leading competitors like DeWalt, Milwaukee, Makita and Bosch in testing. Designed for precision, it drills cleanly through masonry, concrete, brick, stone, ceramic tile, wood, and plastic without the need for a hammer drill, reducing the risk of substrate breakage and vibration-related hand injuries like vibration white finger syndrome.
What are the technical specifications of Adiseal Ultimate 10mm masonry & multi-material drill bit.
| Attribute | Specification |
|---|---|
| Brand | Adiseal |
| Product Type | Masonry/Multi-Material Drill Bit |
| Diameter | 10mm |
| Length | 150mm |
| Shank Type | 1/4 inch Hex (Quick-Change) |
| Material | High-Strength Carbide Tip |
| Compatibility | Rotary Drills (Do Not Use Hammer Mode) |
| Performance Claim | Fastest, Most Durable in Independent Test (No Hammer) |
| GTIN / Barcode | 5060380670311 |
What are the advantages of rotary drilling vs hammer drilling?
- Quieter Operation: Significantly reduces the risk of hearing damage compared to loud hammer drilling.
- Health & Safety: Reduces hand-arm vibration, helping prevent vibration white finger syndrome.
- Precision Placement: Allows for drilling closer to edges without cracking or breaking the substrate.
- Material Integrity: Ideal for delicate surfaces where hammer action often causes shattering.
What materials can I drill with the Adiseal Ultimate 10mm bit?
- Brick & Masonry: Drills cleanly without blowing out the back of the brick.
- Concrete: Efficiently shears through hard aggregate in rotary mode.
- Ceramic: Precision starting without “walking” or cracking.
- Stone & Marble: Ideal for delicate natural stone where impact causes shattering.
- Wood & Plastic: Versatile multi-material performance for clean exit holes.
How do you use the Adiseal Ultimate 10mm drill bit?
How to Drill Precision Holes in Masonry without a Hammer Drill
Total Time: 2 minutes
1. Set Your Drill to Rotary Mode
Ensure your cordless or corded drill is set to rotary-only mode. Do NOT use the hammer or impact setting. The Adiseal Ultimate bit is patented to cut through hard materials using speed and precision rather than blunt force, which protects your drill and the material.
2. Insert the Bit into the Quick-Change Chuck
Snap the 1/4 inch hex shank into your drill’s quick-change chuck or tighten it securely in a standard 3-jaw chuck. The hex shank design prevents the bit from slipping, ensuring 100% power transfer to the carbide tip.
3. Position and Mark Your Hole
Place the point of the 10mm carbide tip exactly on your mark. Because this bit is designed for precision, it will not “walk” or skid across the surface of tiles or polished stone, even without center-punching.
4. Apply Moderate Pressure and High Speed
Begin drilling at a high RPM. Apply firm, steady pressure. Let the bit’s specialized geometry do the work. Unlike standard bits that require a hammer action to break the material, this bit shears the material away cleanly.
5. Clear Dust Periodically
While drilling, occasionally pull the bit back slightly without stopping the motor. This clears the dust from the flutes, preventing overheating and maintaining the maximum drilling speed of the Adiseal Ultimate bit.
Frequently Asked Questions about 10mm Masonry Drill Bit
What is the primary use for the Adiseal Ultimate 10mm masonry drill bit?
The 10mm bit is the standard size for blue or grey wall plugs and heavy-duty M6 sleeve anchors. While brown plugs use a 7mm bit, the 10mm bit is essential for larger fixings used in mounting heavy items like radiators, gate posts, or structural timber.
How does the Adiseal Ultimate 10mm bit compare to Bosch or DeWalt multi-material bits?
In performance tests, the Adiseal Ultimate bit proved to be the fastest and most durable 10mm bit for non-hammer drilling. It consistently drills more holes per bit than leading competitors when used on hard stone and concrete.
Does the 10mm Adiseal bit fit into a standard impact driver?
Yes. It features a universal 1/4 inch quick-change hex shank that fits all standard impact drivers and cordless drills. This shank design eliminates bit slippage, ensuring 100% of the drill’s torque is transferred to the cutting tip.
Why should I use a non-hammer bit for 10mm holes in old brickwork?
Using a hammer drill on older or fragile brickwork often causes the internal structure of the brick to shatter or “blow out” the back. The Adiseal Ultimate 10mm bit drills cleanly using rotation alone, preserving the integrity of the substrate.
Is the 10mm Adiseal bit suitable for drilling through wood and metal?
This is a true multi-material bit. It drills through wood and plastic; however, it is specifically optimized for masonry and stone. For heavy steel, the Adiseal Ultimate metal drill bits are recommended, but for light metal and composite materials, the Adiseal bit performs excellently.
Reviews
There are no reviews yet.